View Other Products
Service Department Chemicals
Super Duty Rubbing Compound (PBS-1)
Download MSDS
DESCRIPTION:
A very aggressive, silicone and wax free compound which quickly removes scratches and oxidation from all painted surfaces. Will maintain a high rate of cut with constant medium pressure on the buffer. Will remove wet sand scratch marks. Use with Granitize’s 702V wool pad or 3000G foam pad.
PRODUCT FEATURES:
• Tan cream
• Silicone free
• Wax free
• Aggressive abrasives for quick removal of scratches and oxidation
• Body shop safe
KEY BENEFITS:
1. Quickly and effectively removes medium to heavy scratches and oxidation, minimizing buffing time
2. Very little product needed, which prevents pads from becoming saturated
3. Body shop safe, since it contains no silicone or wax and won’t “fish eye” paint
APPLICATION:
1. Always start with the roof of the vehicle and proceed to the hood, trunk and then sides.
2. Apply a small amount of product directly on a Granitize wool cutting pad, Part No. 702V or foam pad, Part No. 3000G .
3. While the product is wet, buff a 2’ x 2’ area at a time, with a high speed buffer set some where between 1200 and 1800 RPM with the cutting pad. Buff until the product is dry applying light even pressure. Clean the pad regularly with pad spur.
4. Remove any swirl marks and restore gloss with Granitizes PBS-3 Foam Polishing Pad Glaze with a high speed buffer and a foam polishing pad, Part No. 2000G.
5. Apply a wax product such as Granitizes Polymer Wetcoat, Part No. PW to protect the restored finish.
* Do not use a wax product such as Polymer Wetcoat on freshly painted surfaces as fresh paint must cure for 90 days.
A very aggressive, silicone and wax free compound which quickly removes scratches and oxidation from all painted surfaces. Will maintain a high rate of cut with constant medium pressure on the buffer. Will remove wet sand scratch marks. Use with Granitize’s 702V wool pad or 3000G foam pad.
PRODUCT FEATURES:
• Tan cream
• Silicone free
• Wax free
• Aggressive abrasives for quick removal of scratches and oxidation
• Body shop safe
KEY BENEFITS:
1. Quickly and effectively removes medium to heavy scratches and oxidation, minimizing buffing time
2. Very little product needed, which prevents pads from becoming saturated
3. Body shop safe, since it contains no silicone or wax and won’t “fish eye” paint
APPLICATION:
1. Always start with the roof of the vehicle and proceed to the hood, trunk and then sides.
2. Apply a small amount of product directly on a Granitize wool cutting pad, Part No. 702V or foam pad, Part No. 3000G .
3. While the product is wet, buff a 2’ x 2’ area at a time, with a high speed buffer set some where between 1200 and 1800 RPM with the cutting pad. Buff until the product is dry applying light even pressure. Clean the pad regularly with pad spur.
4. Remove any swirl marks and restore gloss with Granitizes PBS-3 Foam Polishing Pad Glaze with a high speed buffer and a foam polishing pad, Part No. 2000G.
5. Apply a wax product such as Granitizes Polymer Wetcoat, Part No. PW to protect the restored finish.
* Do not use a wax product such as Polymer Wetcoat on freshly painted surfaces as fresh paint must cure for 90 days.
Rubbing Compound (PBS-2)
Download MSDS
DESCRIPTION:
A medium aggressive, silicone and wax free compound which will safely and effectively remove 1200 or finer sand scratches, other fine scratches, medium to heavy duty oxidation, coarse swirl marks or water spots, and leaves a fine finish. Excellent for use with a high speed buffer or hand applications.
PRODUCT FEATURES:
• Light colored cream
• Silicone free
• Wax free
• Medium abrasives
• Body shop safe
KEY BENEFITS:
• Quickly and effectively removes medium scratches and oxidation, minimizing buffing time
• Very little products needed, which prevents pads from becoming saturated
• Body shop safe. Will not cause “Fish Eye” in paint.
APPLICATION WHEN USING WITH A HIGH SPEED BUFFER:
1. Always start with the roof of the vehicle and proceed to the hood, trunk and then sides.
2. Apply a small amount of product directly on a Granitize wool pad, Part No. 702V or foam pad Part No. 3000G.
3. While the product is wet, buff a 2’ X 2’ area at a time with a high speed buffer set between 1,600 rpm and 1,800 rpm.. Buff area using light to medium pressure.
4. Remove compound spatter from adjacent panels before buffing the next panel.
APPLICATION WHEN USED BY HAND:
1. Dispense a quarter size drop of material onto a clean, soft, cotton terry towel or wax applicator and apply to the paint surface using a firm, circular motion.
2. Rub until dry, turning the cloth to assist clean-up. Repeat as necessary. To enhance the finish, remove compound swirls using Granitize Fine Finish II, Part No. PBS-4.
3. Apply a wax product such as Granitizes Polymer Wetcoat, Part No. PW to protect the restored finish.
Do not use a wax product such as Polymer Wetcoat on freshly painted surfaces as fresh paint must cure for 90 days.
A medium aggressive, silicone and wax free compound which will safely and effectively remove 1200 or finer sand scratches, other fine scratches, medium to heavy duty oxidation, coarse swirl marks or water spots, and leaves a fine finish. Excellent for use with a high speed buffer or hand applications.
PRODUCT FEATURES:
• Light colored cream
• Silicone free
• Wax free
• Medium abrasives
• Body shop safe
KEY BENEFITS:
• Quickly and effectively removes medium scratches and oxidation, minimizing buffing time
• Very little products needed, which prevents pads from becoming saturated
• Body shop safe. Will not cause “Fish Eye” in paint.
APPLICATION WHEN USING WITH A HIGH SPEED BUFFER:
1. Always start with the roof of the vehicle and proceed to the hood, trunk and then sides.
2. Apply a small amount of product directly on a Granitize wool pad, Part No. 702V or foam pad Part No. 3000G.
3. While the product is wet, buff a 2’ X 2’ area at a time with a high speed buffer set between 1,600 rpm and 1,800 rpm.. Buff area using light to medium pressure.
4. Remove compound spatter from adjacent panels before buffing the next panel.
APPLICATION WHEN USED BY HAND:
1. Dispense a quarter size drop of material onto a clean, soft, cotton terry towel or wax applicator and apply to the paint surface using a firm, circular motion.
2. Rub until dry, turning the cloth to assist clean-up. Repeat as necessary. To enhance the finish, remove compound swirls using Granitize Fine Finish II, Part No. PBS-4.
3. Apply a wax product such as Granitizes Polymer Wetcoat, Part No. PW to protect the restored finish.
Do not use a wax product such as Polymer Wetcoat on freshly painted surfaces as fresh paint must cure for 90 days.
Foam Polishing Pad Glaze (PBS-3)
Download MSDS
DESCRIPTION:
Granitize Foam Polishing Pad Glaze is recommended for use to remove compounding swirl marks from all types of refinish or factory applied automotive paints. May also be used to remove fine scratches and wheel marks from paints that do not require compounding.
KEY BENEFITS:
• Contains no silicone or wax
• Great on dark colored paints
• Recommended for use to remove compounding swirl marks from all types of refinished or factory applied automotive paints
• Excellent to remove fine scratches and light oxidation
• Use with a high speed variable buffer
APPLICATION:
To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface. Use with an air or electric variable speed buffer (1,200 to 1,600 rpm) equipped with a Granitize Part No. 3000G Foam Polishing Pad.
Shake well before using.
1. Apply enough material to the paint surface to work a two foot by two foot area. To minimize slinging material, apply glaze sparingly and spread with the polishing pad before starting the buffer.
2. Start the buffer and buff using light to medium pressure.
3. Reduce pressure as material begins to dry and polish to a high gloss.
4. Remove material that might have slung onto an adjacent panel using a soft damp cloth as soon as possible or before glazing the next panel. To enhance the finish use Granitize Body Shop Hand Or Machine Glaze Part No. PBS-5 by hand or with a high speed variable buffer equipped with a Granitize Foam Pad Part No. 2000G.
Granitize Foam Polishing Pad Glaze is recommended for use to remove compounding swirl marks from all types of refinish or factory applied automotive paints. May also be used to remove fine scratches and wheel marks from paints that do not require compounding.
KEY BENEFITS:
• Contains no silicone or wax
• Great on dark colored paints
• Recommended for use to remove compounding swirl marks from all types of refinished or factory applied automotive paints
• Excellent to remove fine scratches and light oxidation
• Use with a high speed variable buffer
APPLICATION:
To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface. Use with an air or electric variable speed buffer (1,200 to 1,600 rpm) equipped with a Granitize Part No. 3000G Foam Polishing Pad.
Shake well before using.
1. Apply enough material to the paint surface to work a two foot by two foot area. To minimize slinging material, apply glaze sparingly and spread with the polishing pad before starting the buffer.
2. Start the buffer and buff using light to medium pressure.
3. Reduce pressure as material begins to dry and polish to a high gloss.
4. Remove material that might have slung onto an adjacent panel using a soft damp cloth as soon as possible or before glazing the next panel. To enhance the finish use Granitize Body Shop Hand Or Machine Glaze Part No. PBS-5 by hand or with a high speed variable buffer equipped with a Granitize Foam Pad Part No. 2000G.
Fine Finish III (PBS-4)
Download MSDS
DESCRIPTION:
Granitize Fine Finish II is recommended for use to remove light swirl marks from all types of refinished or factory applied automotive paints. Also excellent for removing ultra fine scratches from paints that do not require compounding.
KEY BENEFITS:
• Contains no silicone or wax
• Recommended for use to remove light swirl marks from all types of refinished or factory applied automotive paints
• Excellent to remove ultra fine scratches also known as spider web scratches in dark colored paints
• Use with a high speed variable buffer
APPLICATION
1. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface.
2. Use with an air or electric variable speed buffer (1,200 to 1,600 rpm) equipped with a Granitize Foam Polishing Pad, Part No. 2000G.
3. Shake well before using.
4. Apply enough material to the paint surface to work a two foot by two foot area. To minimize slinging material, apply polish sparingly and spread with the polishing pad before starting the buffer.
5. Start the buffer and buff using light to medium pressure.
6. Reduce pressure as polish begins to dry and polish to a high gloss.
7. Remove material that might have slung onto an adjacent panel using a soft damp cloth as soon as possible or before polishing the next panel. To enhance the finish use Granitize Body Shop Hand Or Machine Glaze Part No. PBS-5 by hand or with a high speed variable buff equipped with a Granitize Foam Pad Part No. 2000G.
Granitize Fine Finish II is recommended for use to remove light swirl marks from all types of refinished or factory applied automotive paints. Also excellent for removing ultra fine scratches from paints that do not require compounding.
KEY BENEFITS:
• Contains no silicone or wax
• Recommended for use to remove light swirl marks from all types of refinished or factory applied automotive paints
• Excellent to remove ultra fine scratches also known as spider web scratches in dark colored paints
• Use with a high speed variable buffer
APPLICATION
1. To minimize the possibility of staining, do not apply in direct sunlight or onto a hot surface.
2. Use with an air or electric variable speed buffer (1,200 to 1,600 rpm) equipped with a Granitize Foam Polishing Pad, Part No. 2000G.
3. Shake well before using.
4. Apply enough material to the paint surface to work a two foot by two foot area. To minimize slinging material, apply polish sparingly and spread with the polishing pad before starting the buffer.
5. Start the buffer and buff using light to medium pressure.
6. Reduce pressure as polish begins to dry and polish to a high gloss.
7. Remove material that might have slung onto an adjacent panel using a soft damp cloth as soon as possible or before polishing the next panel. To enhance the finish use Granitize Body Shop Hand Or Machine Glaze Part No. PBS-5 by hand or with a high speed variable buff equipped with a Granitize Foam Pad Part No. 2000G.
Body Shop Hand or Machine Glaze (PBS-5)
Download MSDS
DESCRIPTION:
Granitize Body Shop Hand Or Machine Glaze is recommended for use by hand or high speed variable buffer to increase surface gloss and to clean up spatter or residue after machine glazing all types of refinished or factory applied automotive paints.
KEY BENEFITS:
• Contains no wax or silicone
• Refines minor imperfections
• Clear Coat safe
• Show car finish
• Can be used by hand or high speed variable buffer
• Developed using a unique combination of paint glossifiers to provide a brilliant, deep, “wet look” show car finish
APPLICATION:
1. Apply enough material to the paint surface to work a two foot by two foot area.
2. Use a Granitize Foam Polishing Pad, Part No. 2000G and set buffer between 1,200 to 1,600 rpm using light to medium pressure. Reduce pressure when polish begins to dry.
3. When finished, use a Granitize Micro Fiber Cloth, Part No. H-56 to remove any spatter or residue from painted. This will also help produce a high gloss.
4. Hand: Work small areas, about one or two square feet at a time.
5. Shake container well before using.
6. Dispense a half dollar size drop of material onto a clean, soft, cotton terry towel or wax applicator and apply to the paint surface using a firm, circular motion.
7. Wipe off with a clean dry Granitize Micro Fiber Cloth, Part No. H-56 and polish by hand to a high luster. Turn cloth at regular intervals.
Granitize Body Shop Hand Or Machine Glaze is recommended for use by hand or high speed variable buffer to increase surface gloss and to clean up spatter or residue after machine glazing all types of refinished or factory applied automotive paints.
KEY BENEFITS:
• Contains no wax or silicone
• Refines minor imperfections
• Clear Coat safe
• Show car finish
• Can be used by hand or high speed variable buffer
• Developed using a unique combination of paint glossifiers to provide a brilliant, deep, “wet look” show car finish
APPLICATION:
1. Apply enough material to the paint surface to work a two foot by two foot area.
2. Use a Granitize Foam Polishing Pad, Part No. 2000G and set buffer between 1,200 to 1,600 rpm using light to medium pressure. Reduce pressure when polish begins to dry.
3. When finished, use a Granitize Micro Fiber Cloth, Part No. H-56 to remove any spatter or residue from painted. This will also help produce a high gloss.
4. Hand: Work small areas, about one or two square feet at a time.
5. Shake container well before using.
6. Dispense a half dollar size drop of material onto a clean, soft, cotton terry towel or wax applicator and apply to the paint surface using a firm, circular motion.
7. Wipe off with a clean dry Granitize Micro Fiber Cloth, Part No. H-56 and polish by hand to a high luster. Turn cloth at regular intervals.
Spray and Shine (C-11)
Download MSDS
DESCRIPTION:
A Spray on, wipe off formula to enhance and maintain painted surfaces. Removes smudges, smears, finger prints and dust from paint, chrome, and glass.
PRODUCT FEATURES:
• Pink color
• Contains silicone
• Lubricant for Grana-Clay
KEY BENEFITS:
• Removes smudges, smears, finger prints and dust from paint, chrome, and glass
• Great for show room cars touch up
• Recommended lubricant for Grana-Clay
APPLICATION FOR SHOWROOM CARS:
1. Spray on a small amount of product onto a 2’ x 2’ area at a time. Make sure the surface is cool to the touch.
2. With a soft cloth such as Granitizes H-56 Micro Fiber towels, simply wipe the area clean.
APPLICATION FOR USE WITH GRANA-CLAY:
1. Spray on a small amount of product onto a 2’ x 2’ area at a time. Make sure the surface is cool to the touch.
2. Flatten out the Grana-Clay like a pancake and begin rubbing the Grana-Clay on the painted surface until the surface is smooth.
A Spray on, wipe off formula to enhance and maintain painted surfaces. Removes smudges, smears, finger prints and dust from paint, chrome, and glass.
PRODUCT FEATURES:
• Pink color
• Contains silicone
• Lubricant for Grana-Clay
KEY BENEFITS:
• Removes smudges, smears, finger prints and dust from paint, chrome, and glass
• Great for show room cars touch up
• Recommended lubricant for Grana-Clay
APPLICATION FOR SHOWROOM CARS:
1. Spray on a small amount of product onto a 2’ x 2’ area at a time. Make sure the surface is cool to the touch.
2. With a soft cloth such as Granitizes H-56 Micro Fiber towels, simply wipe the area clean.
APPLICATION FOR USE WITH GRANA-CLAY:
1. Spray on a small amount of product onto a 2’ x 2’ area at a time. Make sure the surface is cool to the touch.
2. Flatten out the Grana-Clay like a pancake and begin rubbing the Grana-Clay on the painted surface until the surface is smooth.
Grana Clay (C-12)
DESCRIPTION:
An aggressive clay bar that provides a quick and easy way to smooth away roughness on painted surfaces caused by fallout, overspray, and rail dust.
PRODUCT FEATURES:
• Dark blue for light duty
• Light blue for medium duty
• Purple for heavy duty
• Body shop safe
KEY BENEFITS:
• Flexible clay bar that enhances workability and ease of use
• Extremely versatile. Can be used on paint, chrome, aluminum, plastic and glass
• Effectively removes paint overspray, fallout, rail dust, tree sap, bird droppings, and other surface contaminants
• Contains no hazardous ingredients
APPLICATION:
1. Examine the clay bar to ensure that it’s free of contaminants.
2. Generously mist the surface being treated with Granitizes C-11 Spray & Shine for a lubricant.
3. Flatten Grana-Clay out like a pancake and lightly rub clay bar over the surface.
4. For best results, keep the vehicles surface saturated throughout the process, and kneading the clay bar periodically to ensure the surface of the clay bar is clean.
5. Pressure rinse all areas treated.
An aggressive clay bar that provides a quick and easy way to smooth away roughness on painted surfaces caused by fallout, overspray, and rail dust.
PRODUCT FEATURES:
• Dark blue for light duty
• Light blue for medium duty
• Purple for heavy duty
• Body shop safe
KEY BENEFITS:
• Flexible clay bar that enhances workability and ease of use
• Extremely versatile. Can be used on paint, chrome, aluminum, plastic and glass
• Effectively removes paint overspray, fallout, rail dust, tree sap, bird droppings, and other surface contaminants
• Contains no hazardous ingredients
APPLICATION:
1. Examine the clay bar to ensure that it’s free of contaminants.
2. Generously mist the surface being treated with Granitizes C-11 Spray & Shine for a lubricant.
3. Flatten Grana-Clay out like a pancake and lightly rub clay bar over the surface.
4. For best results, keep the vehicles surface saturated throughout the process, and kneading the clay bar periodically to ensure the surface of the clay bar is clean.
5. Pressure rinse all areas treated.
Zero V.O.C. Degreaser (E-3)
Download MSDS
DESCRIPTION:
A green, very aggressive, concentrated, non caustic all purpose degreaser which is bio-degradable. Dilute 1:20.
PRODUCT FEATURES:
• Green Liquid
• Contains fortified surfactants and water soluble solvents
• Concentrated
• Non caustic
KEY FEATURES:
• Low usage cost since it’s concentrated and mixes with water
• Fortified surfactants loosen and remove dirt and grime
• Versatile product – effectively cleans and degreases engines, engine compartments, wheels, wheel wells, door & trunk jambs.
APPLICATION:
1. Mix 1 part product with 20 parts water (1:20).
2. Wet the entire body area around the engine with cool water.
3. Apply product with a trigger sprayer to the engine, engine compartment, and wheels.
4. Pressure rinse the areas sprayed. Hold the wand 8” to 12” from the surface being rinsed.
5. Pressure rinse the engine compartment last.
* Do not allow product to dry on surface.
A green, very aggressive, concentrated, non caustic all purpose degreaser which is bio-degradable. Dilute 1:20.
PRODUCT FEATURES:
• Green Liquid
• Contains fortified surfactants and water soluble solvents
• Concentrated
• Non caustic
KEY FEATURES:
• Low usage cost since it’s concentrated and mixes with water
• Fortified surfactants loosen and remove dirt and grime
• Versatile product – effectively cleans and degreases engines, engine compartments, wheels, wheel wells, door & trunk jambs.
APPLICATION:
1. Mix 1 part product with 20 parts water (1:20).
2. Wet the entire body area around the engine with cool water.
3. Apply product with a trigger sprayer to the engine, engine compartment, and wheels.
4. Pressure rinse the areas sprayed. Hold the wand 8” to 12” from the surface being rinsed.
5. Pressure rinse the engine compartment last.
* Do not allow product to dry on surface.
Auto Suds (S-1)
Download MSDS
DESCRIPTION:
A highly concentrated pink liquid soap featuring a high, stable foam that lifts and holds dirt in suspension and film free rinsing.
PRODUCT FEATURES:
• Pink liquid
• Film free rinsing
• Low alkalinity
• Highly concentrated
KEY BENEFITS:
• Low usage cost since it’s highly concentrated and mixes with water
• Saves time and effort because of its high, stable foam lifts and holds dirt in suspension and promotes film free rinsing
• Safe for all paint types due to its pH balanced formulation and non streaking properties
HOW TO USE:
• Mix 1.5 parts product with 128 parts water (8 ounces of soap in 5 gallons of water).
• Ensure the vehicle is out of direct sunlight, and then wet its surface with cool water.
• Apply Auto Suds solution from the top of the vehicle down.
• Agitate the solution with a sponge or wash mitt, including the wheel wells (using a separate mitt).
• Rinse the vehicle from the top down, using low pressure.
• Remove any excess water with a chamois.
A highly concentrated pink liquid soap featuring a high, stable foam that lifts and holds dirt in suspension and film free rinsing.
PRODUCT FEATURES:
• Pink liquid
• Film free rinsing
• Low alkalinity
• Highly concentrated
KEY BENEFITS:
• Low usage cost since it’s highly concentrated and mixes with water
• Saves time and effort because of its high, stable foam lifts and holds dirt in suspension and promotes film free rinsing
• Safe for all paint types due to its pH balanced formulation and non streaking properties
HOW TO USE:
• Mix 1.5 parts product with 128 parts water (8 ounces of soap in 5 gallons of water).
• Ensure the vehicle is out of direct sunlight, and then wet its surface with cool water.
• Apply Auto Suds solution from the top of the vehicle down.
• Agitate the solution with a sponge or wash mitt, including the wheel wells (using a separate mitt).
• Rinse the vehicle from the top down, using low pressure.
• Remove any excess water with a chamois.